Россия
+7 800 55 173 55
Оставить заявку
 
 

Заказ на LABOM CI4110-A1056-F2-H21-M21.1-Y12-T30-K1085-X3-W4022-W2002-W26 74 DL3430-HY-A4007-L23-T14-W4035-W1020 — 13.05.2020

LABOM CI4110-A1056-F2-H21-M21.1-Y12-T30-K1085-X3-W4022-W2002-W26 74 DL3430-HY-A4007-L23-T14-W4035-W1020 — Отправить заявку на info@famaga.ru

Состав заказа:

  • Производитель: LABOM
  • Страна: Германия
  • Артикульный номер: CI4110-A1056-F2-H21-M21.1-Y12-T30-K1085-X3-W4022-W2002-W26 74 DL3430-HY-A4007-L23-T14-W4035-W1020
  • Описание: Преобразователь давления PRESSURE TRANSMITTER PASCAL Ci4 for diaphragm seal operation, hygienic process connection bottom see data sheet D4-016-2 CI4110 nominal range: 0...4 bar, Turndown max. 100:1, overload limit 10 bar; sensor type piezoresistiv A1056 accuracy: <= 0.10% from adjusted measuring span (Lin./Hys./Rep., up to Turndown <=5:1 no changes) F2 parameterizing: see below -1...+3 bar H21 output signal: 4...20 mA with HART high-resolution graphic display with backlight intuitive 4-button operation, quick access to device data available languages (English, German), default setting English M21.1 Y1 material case: stainless steel mat. no. 1.4301/1.4305 (304/303) 2 material front cover: stainless steel, window non-splittering glass degree of protection: IP 65 / IP 67 T30 electrical connection: circular connector M12 x 1 (4 pin) K1085 design: standard X3 temperature compensation: active temperature compensation ATC marking: stainless steel Tag-plate, fixed with stainless steel wire, marking see below W4022 W2002 CALIBRATION PROTOCOL: with 5 measuring points W2674 EAC-TR certification exemption statement process connection: DL DIAPHRAGM SEAL for food / pharmaceutical / biotechnology design with clamp connection see data sheet D5-026 3 process connection: per DIN 32676 model C (Tri-Clamp) for pipes per ASME BPE, DN 2 1/2" / PN 16 430 hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm connection of meas. instrument directly welded 7 material wetted parts: stainless steel mat.-no. 1.4435 (316L) system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered L23 T14 temperature, media: -10..+150 °C W4035 ADDITIONAL DESIGN: wetted parts electropolished W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts
  • Дата последнего заказа: 13.05.2020
Менеджеры Famaga успешно приняли и отгрузили заказ на LABOM CI4110-A1056-F2-H21-M21.1-Y12-T30-K1085-X3-W4022-W2002-W26 74 DL3430-HY-A4007-L23-T14-W4035-W1020 от 13.05.2020 в Дублин. После отправки заявки заказчик получил от нашей компании лучшую цену. Интересует такой же товар? После отправления заявки, наши менеджеры помогут Вам выбрать и купить нужный товар LABOM в кратчайшие сроки. Для запроса цен и сроков поставки, пожалуйста, заполните форму обратной связи или пришлите описание необходимых Вам наименований на электронный адрес info@famaga.ru
Оставьте заявку
Наш менеджер ответит на любой вопрос.
  • Напишите своё имя
  • Напишите телефон для связи
  • Напишите свой адрес электронной почты
  • ИНН необходим для выставления счетов
  • Неверный номер ИНН

Ежедневно обрабатываем более 200 заказов

Следите, какое оборудование заказывают наши клиенты прямо сейчас
Производитель
Состав заказа
CV3110-A1059.1-F80-H1100-M2-N10-T30-K1085-W4022-W2002-W26 74 DL3330-HY-A4007-L22-W4035-W1020 Преобразователь давления PRESSURE TRANSMITTER PASCAL CV, for diaphragm seal operation, hygienic acc. to data sheet D4-017/22 CV3110 A1 pressure sensor: piezoresistive for gauge pressure 059.1 nominal range: -1...16 bar, overload limit 60 bar measuring range setting: turndown 5:1 accuracy: <= 0.15% of measuring span (linearity, hysteresis and repeatability) F80 measuring range: setting see below lower range value: - 1,000 upper range value: + 6,000 unit: bar H11 output signal: 4...20 mA, rising characteristic (standard) 0 setting damping: 0.0 sec. (standard) 0 setting alarm state: < 3.6 mA (standard) display module: multifunctional display with 5-position digital display and bar graph, pluggable M2 N10 switching module: without case: hygienic housing design with screw cap material: stainless steel degree of protection: IP 66 T30 electrical connection: circular connector M12x1 (4 pin) K1085 design standard ADDITIONAL DESIGN: stainless steel Tag-plate with stainless steel wire marking see below W4022 W2002 CALIBRATION PROTOCOL: with 5 measuring points W2674 EAC-TR certification exemption statement DL DIAPHRAGM SEAL for food / pharmaceutical / biotechnology design with clamp connection see data sheet D5-026 3 process connection: per DIN 32676 model C (Tri-Clamp) for pipes per ASME BPE, DN 2" / PN 16 330 hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm HY A400 connection of meas. instrument directly welded 7 material wetted parts: stainless steel mat.-no. 1.4435 (316L) system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered design temperature process +10...+140 °C L22 W4035 ADDITIONAL DESIGN: wetted parts electropolished W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts
Узнать цену
MZ1100-B64-W2002 CV3110-A1059-F80-H2100-M1-N10-T30-K1085-W4022-W2674 BH5200 ECO-A99-W5124-W2674 DL8090-HY-D2546-E7-G7-H2-A400-L23-T99-W4035-W1020 Система измерения давления MZ1100 COMBIBAR PRESSURE MEASURING SYSTEM B64 drawing no.: PD-WV-00178 BOURDON TUBE PRESSURE GAUGE: W2002 CALIBRATION PROTOCOL: with 5 measuring points PRESSURE TRANSMITTER PASCAL CV, for diaphragm seal operation, hygienic acc. to data sheet D4-017/22 CV3110 A1 pressure sensor: piezoresistive for gauge pressure 059 nominal range: 0...16 bar, overload limit 60 bar measuring range setting: turndown 5:1 accuracy: <= 0.15% of measuring span (linearity, hysteresis and repeatability) F80 measuring range: setting see below lower range value: - 1,000 upper range value: + 4,000 unit: bar H21 output signal: 4...20 mA with HART function module 0 setting damping: 0.0 sec. (standard) 0 setting alarm state: < 3.6 mA (standard) M1 display module: without screw cap closed, without window N10 switching module: without case: hygienic housing design with screw cap material: stainless steel degree of protection: IP 66 T30 electrical connection: circular connector M12x1 (4 pin) K1085 design standard process temperature 0...+125 °C, short term up to +140 °C, 1 h ADDITIONAL DESIGN: stainless steel Tag-plate with stainless steel wire marking see below W4022 W2674 EAC-TR certification exemption statement PRESSURE GAUGE DN 100 ECOnomic for food/pharmaceutical/biotechnology acc. to data sheet D2-028-5 BH52 00 case design: IP 65, process connection bottom A99 nominal range: see below -1 ... 4 bar overload protected: 1.3 times pointer: with micro adjusting device for zero-point correction CUSTOMER'S SPECIFICATION: scale: Zeta logo type plate: Labom documentation: Labom W5124 W2674 EAC-TR certification exemption statement DIAPHRAGM SEAL for food/pharmaceutical/biotechnology see data sheet D5-024-3 DL8 090 design: process connection per INGOLD hygienic design per EHEDG Doc.8 and ASME BPE SF3: surface roughness (wetted parts) - turned parts Ra <= 0.76 μm - diaphragm Ra <= 0.38 μm - weld seam Ra <= 0.76 μm HY D25 process connection: DN 25, hexagon union nut A/F 46, G 1 1/4" 46 insertion length: h = 46 mm E7 basic body material: stainless steel mat.-no. 1.4435 (316L), wetted part G7 diaphragm material: stainless steel mat.-no. 1.4435 (316L) H2 gasket: per EPDM -FDA A400 connection of meas. instrument directly welded system filling: Synthetic oil, free of silicon FD1 acc. to FDA 21 CFR 178.3570 / H1-registered L23 DMB_729 T99 temperature, media: see below +10...+150°C W4035 ADDITIONAL DESIGN: wetted parts electropolished W1020 Components marked acc. to material inspection certificate per EN 10204-3.1, wetted parts
Узнать цену

Прочие заказы LABOM

Наверх страницы
Перейти на мобильную версию сайта